Mircrofabricating double-sided polydimethylsiloxane (PDMS) artificial phylloplane for microbial food safety research.

Leafy green surface microbiology studies often experience significant variations in results due to the heterogeneous nature of leaf surfaces. To provide a precise and controllable substitute, we microfabricated double-sided artificial leafy green phylloplanes using polydimethylsiloxane (PDMS) with a vinyl-terminated polyethylene glycol chain-based hydrophobicity modifier (PDMS-PEG) to modify PDMS hydrophobicity. We further tested the properties and applications of these artificial leaves, by examining the function of epicuticular wax, growth and survival of E. coli O157:H7 87-23 on the surface, and removal of attached E. coli cells via sanitation. The double-sided PDMS-PDMS-PEG leaves well-replicated their natural counterparts in macroscopic and microscopic structure, hydrophobicity, and E. coli O157:H7 87-23 attachment. After depositing natural epicuticular wax onto artificial leaves, the leaf surface wetting ability decreased, while E. coli O157:H7 87-23 surface retention increased. The artificial leaves supplied with lettuce lysate or bacterial growth media supported E. coli O157:H7 87-23 growth and survival similarly to those on natural leaves. In the sanitation test, the artificial lettuce leaves also displayed patterns similar to those of natural leaves regarding sanitizer efficiency. Overall, this study showcased the microfabrication and applications of double-sided PDMS-PDMS-PEG leaves as a replicable and controllable platform for future leafy green food safety studies.

The Critical Role of Intracellular Bacterial Communities in Uncomplicated Recurrent Urinary Cystitis: A Comprehensive Review of Detection Methods and Diagnostic Potential.

Urinary tract infections (UTIs) are among the most common bacterial infections worldwide and are particularly prevalent in women. Recurrent UTIs significantly diminish quality of life due to their symptoms and frequent relapses. Patients often experience immediate relapse following slightly strenuous activities or intense psychological stress. In this review, we explore why infections persist despite the advent of various treatments and suggest strategies to manage recurrent cystitis by targeting the mechanisms of adhesion and infection. Vitamin D levels and the expression of neutrophil gelatinase-associated lipocalin are linked to the recurrence of UTIs. During a UTI, bacteria employ adhesins to invade the urinary tract, adhere to urothelial cells, and then penetrate these cells, where they rapidly multiply to establish intracellular bacterial communities. Bacteria can also form quiescent intracellular reservoirs that escape immune responses and antibiotic treatments, leading to recurrence under certain conditions. The surface proteins of bacteria and D-mannose are crucial in the adhesion of bacteria to the urothelium. Understanding these processes provides valuable insights into potential therapeutic approaches that focus on preventing bacterial attachment and cluster formation. By disrupting the ability of bacteria to adhere to and form clusters on cells, we can better manage recurrent UTIs and improve patient outcomes.

Visible light-induced photocatalytic and antibacterial adhesion properties of superhydrophilic TiO2 nanoparticles.

Bacterial infections triggered by patient or healthcare worker contact with surfaces are a major cause of medically acquired infections. By controlling the kinetics of tetrabutyl titanate hydrolysis and condensation during the sol-gel process, it is possible to regulate the content of Ti3+ and oxygen vacancies (OVs) in TiO2, and adjust the associated visible light-induced photocatalytic performance and anti-bacterial adhesion properties. The results have shown that the Ti3+ content in TiO2 was 9.87% at the calcination temperature of the reaction system was 300 °C and pH was 1.0, corresponding to optimal photocatalytic and hydrophilic properties. The formation of a hydrated layer on the superhydrophilic surface provided resistance to bacterial adhesion, preventing cross-contamination on high-touch surfaces. The excellent photocatalytic self-cleaning performance and anti-bacterial adhesion properties can be attributed to synergistic effects associated with the high specific surface area of TiO2 nanoparticles, the mesoporous structure, and the presence of Ti3+ and OVs. The formation of superhydrophilic self-cleaning surfaces under visible light can serve as the basis for the development of a new class of anti-bacterial adhesion materials.

A study on disinfection and adhesion behaviour between bacteria and photocatalytic nanostructures by extended DLVO.

Recently, there has been a growing concern regarding the increased contamination of water by bacteria. As a result, more attention has been paid to the potential benefits of utilizing nano adsorbents and photocatalysis for water purification. In order to better manipulate the physicochemical properties, it is crucial to gain a comprehensive understanding of the molecular behaviour between nanoparticles and pathogens. This article investigates the various interactions that can occur between Fe3O4-SiO2-TiO2 (FST) nanoparticles and bacterial cells. Moreover, it explores the impact of the SiO2 mid-layer and the governing interaction in the adhesion and degradation processes. In this regard, FST nanoparticles were prepared, and their adhesion behaviour to E. coli bacterial cells was evaluated using extended DLVO (Derjaguin-Landau-Verwey-Overbeek) theory. The following results revealed that the presence of silica transformed FST into a more hydrophobic material with a positively charged surface, thereby enhancing its affinity for bacterial adsorption. Additionally, SiO2 prevented electron/hole recombination. Amongst the various interactions, Lewis acid-base interactions had the greatest influence on the total energy and lacking energy barriers led to irreversible adhesion. Moreover, the presence of an increased number of ·OH groups on the surface resulted in enhanced bactericidal properties of FST, leading to severe damage of E. coli cells through the formation of a greater number of hydrogen bonds on the bacterial surface, which is the basis of the proposed mechanism for destruction of the bacterial structure.

Evaluation of surface energy and surface stability and adherence of Candida albicans to octa fluoro pentyl (meth) acrylate-coated PEEK using plasma spray.

Background: Polyetheretherketone (PEEK) has favorable properties that make it able to be used as a denture base material, but it is also susceptible to the adhesion of microorganisms. In this study, we applied Octafluoropentyl (meth) acrylate (OFPA) coating on the PEEK polymer surface by using plasma spray and investigated the functional groups present on the surface, changes in the surface energy and Candida albicans adhesion. Materials and Methods: In this experimental study, the samples were placed in a control group without surface preparation and three experimental groups that were subjected to plasma spray for 10, 30, and 60 s and then impregnated with degassed Octa fluoropentyl (meth) acrylate (Sigma-Aldrich, USA) monomer. Fourier transform infrared spectroscopy (FTIR) was used to identify the functional groups and new chemical bonds between PEEK and OFPA, and Sessile Drop Method was used to evaluate the surface's wettability. The surface morphology was checked using a LEXT OLS4000 (Olympus®-Japan) microscope, and the inhibition of C. albicans adhesion was also checked by counting the colonies in terms of colony forming unit/mL (CFU/mL). Kurskal-Wallis analysis was conducted to assess Candida adhesion, while wettability was evaluated using analysis of variance and post hoc analyses. The level of statistical significance was set at P < 0.05. Results: FTIR analysis confirmed that a chemical between OFPA and PEEK was established. The samples showed a significant increase in the contact angle after 30 s of plasma application (CA = 88.2 ± 7.3). The contact angle decreased again by increasing the surface modification to 60 s (CA = 64.33 ± 5.5). Examining the surface morphology of the samples shows an increase in surface roughness with increasing plasma time up to 60 s. The number of adherent colonies was the lowest in 30 s group, but it was not statistically significant (P = 0.658). Conclusion: No statistically significant difference in C. albicans CFU/mL count was found between groups. The contact angle of the 30 s group was significantly higher than the control group.

Polymer-Metal Bilayer with Alkoxy Groups for Antibacterial Improvement.

Many bio-applicable materials, medical devices, and prosthetics combine both polymer and metal components to benefit from their complementary properties. This goal is normally achieved by their mechanical bonding or casting only. Here, we report an alternative easy method for the chemical grafting of a polymer on the surfaces of a metal or metal alloys using alkoxy amine salt as a coupling agent. The surface morphology of the created composites was studied by various microscopy methods, and their surface area and porosity were determined by adsorption/desorption nitrogen isotherms. The surface chemical composition was also examined by various spectroscopy techniques and electrokinetic analysis. The distribution of elements on the surface was determined, and the successful bonding of the metal/alloys on one side with the polymer on the other by alkoxy amine was confirmed. The composites show significantly increased hydrophilicity, reliable chemical stability of the bonding, even interaction with solvent for thirty cycles, and up to 95% less bacterial adhesion for the modified samples in comparison with pristine samples, i.e., characteristics that are promising for their application in the biomedical field, such as for implants, prosthetics, etc. All this uses universal, two-step procedures with minimal use of energy and the possibility of production on a mass scale.

Non Clinical Model to Assess the Mechanism of Action of a Combined Hyaluronic Acid, Chondroitin Sulfate and Calcium Chloride: HA+CS+CaCl2 Solution on a 3D Human Reconstructed Bladder Epithelium.

Purpose: Medical Device Regulation (EU) 2017/745 requires the principal mode of action (MoA) to be demonstrated by experimental data. The MoA of Ialuril® Prefill (combined as HA+CS+CaCl2: sodium hyaluronate 1.6%, sodium chondroitin sulphate 2% w/v and calcium chloride 0.87%) Class III medical device, indicated for intravesical instillation to reduce urinary tract infections, has been evaluated on a 3D reconstructed human bladder epithelium (HBE). Methods: Three experimental designs; i) E. coli strain selection (DSM 103538, DSM 1103) to investigate the HA+CS+CaCl2 properties in modifying bacterial growth in liquid broth (CFU 4h and 24h) at 80%, 50% and 25% concentrations; ii) evaluation of film forming properties on HBE after 15 min exposure by quantifying caffeine permeation across the epithelium; iii) capacity to counteract E. coli adhesion and biofilm formation on colonized HBE by viable counts and ultrastructural analysis by scanning electron microscopy (SEM) using ciprofloxacin as the reference antimicrobial molecule. Results: No significant differences were observed in bacterial viability for both the E. coli strains. HA+CS+CaCl2 reduced caffeine permeation of 51.7% and 38.1% at 1h and 2h, respectively and determined a significant decrease in caffeine permeation rate at both timepoints supporting HA+CS+CaCl2 capacity to firmly adhere to the bladder epithelium creating a physical barrier on the surface. The viable counts in HBE treated tissues then infected with E. coli resulted not different from the negative control suggesting that the device did not inhibit E. coli growth. SEM images showed homogenous product distribution over the HBE surface and confirmed the capacity of HA+CS+CaCl2 to adhere to the bladder epithelium, counteracting biofilm formation. Conclusion: The results support the capacity of HA+CS+CaCl2 to counteract bacterial invasion by using a physico-mechanical mode of action: this medical device represents a valid alternative to antibiotics in the treatment of recurrent UTIs.

Magnetic Hydroxyapatite-Coated Iron-Chromium Microspheres for Dental Surface Polishing and Plaque Removal.

This research aimed to engineer magnetic hydroxyapatite-coated iron-chromium (HAp-FeCr) microspheres to enhance dental surface polishing and plaque elimination. Utilizing a tailored sol-gel approach, the HAp-FeCr microspheres were synthesized and exhaustively characterized via scanning electron microscopy, energy-dispersive X-ray spectroscopy, ζ-potential, X-ray diffractometry, and X-ray photoelectron spectroscopy methodologies. Key findings showcased that these microspheres retained their magnetic properties post-HAp coating, as evidenced by the magnetization curves. An innovative magnetic polishing system was developed, incorporating these microspheres and a 2000 rpm magnet. Comparative evaluations between traditional air-powder polishing and the proposed magnetic technique demonstrated the latter's superiority. Notably, the magnetic polishing led to a substantial reduction in dental plaque on the tooth surface, decreasing bacterial adhesion and early biofilm formation by Streptococcus gordonii and Lactobacillus acidophilus, where the most pronounced effects were observed in samples with elevated HAp content. A significant 60% reduction in dental plaque was achieved with the magnetic method relative to air-powder polishing. Furthermore, the HAp-FeCr microspheres' biocompatibility was verified through cytotoxicity tests and animal studies. In essence, the magnetic HAp-FeCr microspheres present a novel and efficient strategy for dental treatments, holding immense potential for improving oral health.

Rate limiting step of the allosteric activation of the bacterial adhesin FimH investigated by molecular dynamics simulations.

The bacterial adhesin FimH is a model for the study of protein allostery because its structure has been resolved in multiple configurations, including the active and the inactive state. FimH consists of a pilin domain (PD) that anchors it to the rest of the fimbria and an allosterically regulated lectin domain (LD) that binds mannose on the surface of infected cells. Under normal conditions, the two domains are docked to each other and LD binds mannose weakly. However, in the presence of tensile force generated by shear the domains separate and conformational changes propagate across LD resulting in a stronger bond to mannose. Recently, the crystallographic structure of a variant of FimH has been resolved, called FimH FocH , where PD contains 10 mutations near the inter-domain interface. Although the X-ray structures of FimH and FimH FocH are almost identical, experimental evidence shows that FimH FocH is activated even in the absence of shear. Here, molecular dynamics simulations combined with the Jarzynski equality were used to investigate the discrepancy between the crystallographic structures and the functional assays. The results indicate that the free energy barrier of the unbinding process between LD and PD is drastically reduced in FimH FocH . Rupture of inter-domain hydrogen bonds involving R166 constitutes a rate limiting step of the domain separation process and occurs more readily in FimH FocH than FimH. In conclusion, the mutations in FimH FocH shift the equilibrium toward an equal occupancy of bound and unbound states for LD and PD by reducing a rate limiting step.

Biomaterials coated with zwitterionic polymer brush demonstrated significant resistance to bacterial adhesion and biofilm formation in comparison to brush coatings incorporated with antibiotics.

A critical problem with the use of biomaterial implants is associated with bacterial adhesion on the surface of implants and in turn the biofilm formation. Among different strategies that have been reported to resolve this dilemma, surface design combined with both antiadhesive and antimicrobial properties has proven to be highly effective. Physiochemical properties of polymer brush coatings possess non-adhesive capability against bacterial adhesion and create a niche for further functionalization. The current study aims to evaluate the effect of antibiotics incorporated into the polymer brush on bacterial adhesion and biofilm formation. Brushes made of zwitterionic polymers were synthesized, functionalized with vancomycin via both physical and chemical conjugation, and grafted onto the silicon rubber surfaces. Antibacterial and antiadhesive measurements of designed coated biomaterials were mediated through the use of a parallel plate flow chamber against biofilm growth developed by Staphylococcus aureus and Escherichia coli over a period of 24 h. The analysis of biofilm growth on designed coated biomaterials showed that the pristine coated zwitterionic brushes are significantly resistant to bacterial adhesion and biofilm formation but not in the polymer brush coating incorporated with antibiotics.

Gene de virulência oipA de Helicobacter pylori como marcador molecular de gastropatias severas / Helicobacter pylori oipa virulence gene as a molecular marker of severe gastropathies

ABSTRACT Background: Helicobacter pylori is an etiologic agent of gastroduodenal diseases. The microorganism, considered a type I carcinogen, affects about 50% of the global population. H. pylori virulence factors are determinant for the clinical outcome of the infection. The outer inflammatory protein A (oipA) gene encodes an outer membrane adhesin and is related to severe gastropathies, such as gastric cancer. Objective: The aim of this study was to evaluate the association of the oipA gene with the severity of gastroduodenal diseases in dyspeptic patients in region Central Brazil. Methods: The polymerase chain reaction (PCR) was used to determine the presence of H. pylori. Samples positives were used for molecular screening of the oipA gene. Gastropathies were categorized as non-severe and severe diseases. Results: Approximately 68% of patients had H. pylori and 36% were infected with H. pylori oipA+ strains. Infection was significantly associated in patients aged over 44 years (P=0.004). However, there was no association between oipA and patients' age (P=0.89). Approximately 46% of patients infected with oipA+ strains had some severe illness. Gastric adenocarcinoma was the most frequent severe gastropathy. The H. pylori oipA genotype was inversely associated with the severity of gastroduodenal diseases (OR=0.247, 95%CI: 0.0804-0.7149 and P=0.007). Conclusion: The characterization of possible molecular markers will contribute to personalized medicine, impacting the prognosis of patients.

RESUMO Contexto: Helicobacter pylori é um agente etiológico de doenças gastroduodenais. O microrganismo, considerado cancerígeno tipo I, afeta cerca de 50% da população mundial. Os fatores de virulência do H. pylori são determinantes para o desfecho clínico da infecção. O gene da proteína inflamatória externa A (oipA) codifica uma adesina da membrana externa e está relacionado a gastropatias severas, como o câncer gástrico. Objetivo: O objetivo deste estudo foi avaliar a associação do gene oipA com a gravidade das doenças gastroduodenais em pacientes dispépticos na região Brasil Central. Métodos: A reação em cadeia da polimerase (PCR) foi utilizada para determinar a presença de H. pylori. Amostras positivas foram utilizadas para triagem molecular do gene oipA. As gastropatias foram categorizadas como doenças não severas e severas. Resultados: Aproximadamente 68% dos pacientes apresentaram H. pylori e 36% estavam infectados com cepas H. pylori oipA+. A infecção foi significativamente associada em pacientes com idade superior a 44 anos (P=0,004). No entanto, não houve associação entre oipA e a idade dos pacientes (P=0,89). Aproximadamente 46% dos pacientes infectados com cepas oipA+ tiveram alguma doença severa. O adenocarcinoma gástrico foi a gastropatia severa mais frequente. O genótipo oipA de H. pylori foi inversamente associado à gravidade das doenças gastroduodenais (OR=0,247, IC95%: 0,0804-0,7149 P=0,007). Conclusão: A caracterização de possíveis marcadores moleculares contribuirá para a medicina personalizada, impactando no prognóstico dos pacientes.

Influence of Hydrodynamic Forces on Electroactive Bacterial Adhesion in Microbial Fuel Cell Anodes.

This investigation examined the role of shear stress on the dynamic development of microbial communities within anodic biofilms in single-chamber microbial fuel cells (MFCs). Bacterial attachment to surfaces, often regarded as a crucial step in biofilm formation, may significantly contribute to the selection of electroactive bacteria (EAB). It is well established that hydrodynamic forces, particularly shear forces, have a profound influence on bacterial adhesion. This study postulates that shear stress could select EAB on the anode during the adhesion phase by detaching non-EAB. To examine this hypothesis, MFC reactors equipped with a shear stress chamber were constructed, creating specific shear stress on the anode. The progression of adhesion under various shear stress conditions (1, 10, and 50 mPa) was compared with a control MFC lacking shear stress. The structure of the microbial community was assessed using 16S rRNA gene (rrs) sequencing, and the percentage of biofilm coverage was analyzed using fluorescence microscopy. The results indicate a significant impact of shear stress on the relative abundance of specific EAB, such as Geobacter, which was higher (up to 30%) under high shear stress than under low shear stress (1%). Furthermore, it was noted that shear stress decreased the percentage of biofilm coverage on the anodic surface, suggesting that the increase in the relative abundance of specific EAB occurs through the detachment of other bacteria. These results offer insights into bacterial competition during biofilm formation and propose that shear stress could be utilized to select specific EAB to enhance the electroactivity of anodic biofilms. However, additional investigations are warranted to further explore the effects of shear stress on mature biofilms.

Upregulation of occludin by cytolethal distending toxin facilitates Glaesserella parasuis adhesion to respiratory tract cells.

Virulent Glaesserella parasuis may engender systemic infection characterized by fibrinous polyserositis and pneumonia. G. parasuis causes systemic disease through upper respiratory tract infection, but the mechanism has not been fully characterized. Tight junction (TJ) proteins maintain the integrity and impermeability of the epithelial barriers. In this work, we applied the recombinant cytolethal distending toxin (CDT) holotoxin and cdt-deficient mutants to assess whether CDT interacted with TJ proteins of airway tract cells. Our results indicated that CDT induced the TJ occludin (OCLN) expression in newborn pig tracheal epithelial cells within the first 3 hours of bacterial infection, followed by a significant decrease. Overexpression of OCLN in target cells made them more susceptible to G. parasuis adhesion, whereas ablation of OCLN expression by CRISPR/Cas 9 gene editing technology in target cells decreased their susceptibility to bacterial adhesion. In addition, CDT treatment could upregulate the OCLN levels in the lung tissue of C57/BL6 mice. In summary, highly virulent G. parasuis strain SC1401 stimulated the tight junction expression, resulting in higher bacterial adhesion to respiratory tract cells, and this process is closely related to CDT. Our results may provide novel insights into G. parasuis infection and CDT-mediated pathogenesis.

A high throughput microphysiological model of prosthetic valve endocarditis for investigating factors that influence bacterial adhesion under fluid shear stress.

Prosthetic heart valves are associated with almost one quarter of cases of infective endocarditis, a rare but serious condition with a staggering 25 % mortality rate. Without the endothelium of native valves, the risk of infection is exacerbated for implanted devices exposed to blood. There are currently no physiologically relevant in vitro or animal models of prosthetic valve endocarditis (PVE). Of particular importance, Staphylococcus aureus, a common agent of PVE, has demonstrated enhanced binding to blood plasma proteins (e.g., fibrinogen) and exposed matrix under fluid shear stress (FSS). An in vitro platform that mimics the multiple physiological determinants for S. aureus adhesion to prosthetic valve materials would facilitate the discovery of new treatments to minimize PVE. To this end, we developed a first-of-its-kind microphysiological model of PVE to study the effects of several key variables (endothelial cell coverage, fibrinogen deposition, surface treatments, and FSS) on S. aureus adhesion to bioprosthetic material surfaces. Our model demonstrated that viable endothelial monolayers diminished the deposition of fibrinogen and that fibrinogen was required for the subsequent adhesion of S. aureus to the bioprosthetic surface model. Next, we examined factors that affected endothelial cell coverage, such as FSS and glutaraldehyde, a common chemical treatment for bioprosthetic materials. In particular, glutaraldehyde treatment obstructed endothelialization of otherwise biocompatible collagen-coated surfaces, further enabling fibrinogen and S. aureus deposition. In future work, this model could impact multiple research areas, such as screening candidate bioprosthetic valve materials and new surface treatments to prevent PVE and further understanding host-pathogen interactions.

Enhancing the mechanical properties and surface morphology of individualized Ti-mesh fabricated through additive manufacturing for the treatment of alveolar bone defects.

Titanium meshes are widely utilized in alveolar bone augmentation, and this study aims to enhance the properties of titanium meshes through heat treatment (HT) and the synergistic finishing technology of electric field and flow field (EFSF). Our findings illustrate that the titanium mesh exhibits improved mechanical properties following HT treatment. The innovative EFSF technique, in combination with HT, has a substantial impact on improving the surface properties of titanium meshes. HT initiates grain fusion and reduces surface pores, resulting in enhanced tensile and elongation properties. EFSF further enhances these improvements by significantly reducing surface roughness and eliminating adhered titanium powder, a byproduct of selective laser melting printing. Increased hydrophilicity and surface-free energy are achieved after EFSF treatment. Notably, the EFSF-treated titanium mesh exhibits reduced bacterial adhesion and is non-toxic to osteoblast proliferation. These advancements increase its suitability for clinical alveolar bone augmentation.

Structural foundation for the role of enterococcal PrgB in conjugation, biofilm formation, and virulence.

Type 4 Secretion Systems are a main driver for the spread of antibiotic resistance genes and virulence factors in bacteria. In Gram-positives, these secretion systems often rely on surface adhesins to enhance cellular aggregation and mating-pair formation. One of the best studied adhesins is PrgB from the conjugative plasmid pCF10 of Enterococcus faecalis, which has been shown to play major roles in conjugation, biofilm formation, and importantly also in bacterial virulence. Since prgB orthologs exist on a large number of conjugative plasmids in various different species, this makes PrgB a model protein for this widespread virulence factor. After characterizing the polymer adhesin domain of PrgB previously, we here report the structure for almost the entire remainder of PrgB, which reveals that PrgB contains four immunoglobulin (Ig)-like domains. Based on this new insight, we re-evaluate previously studied variants and present new in vivo data where specific domains or conserved residues have been removed. For the first time, we can show a decoupling of cellular aggregation from biofilm formation and conjugation in prgB mutant phenotypes. Based on the presented data, we propose a new functional model to explain how PrgB mediates its different functions. We hypothesize that the Ig-like domains act as a rigid stalk that presents the polymer adhesin domain at the right distance from the cell wall.

Oregano Essential Oil versus Conventional Disinfectants against Salmonella Typhimurium and Escherichia coli O157:H7 Biofilms and Damage to Stainless-Steel Surfaces.

This study compared the effect of oregano essential oil versus sodium hypochlorite, hydrogen peroxide, and benzalkonium chloride against the viability of adhered Salmonella Typhimurium and Escherichia coli O157:H7 on 304 stainless steel. Oregano essential oil was effective in disrupting the biofilms of both bacteria at concentrations ranging from 0.15 to 0.52 mg mL-1. In addition, damage to stainless-steel surfaces following disinfection treatments was assessed by weight loss analysis and via visual inspection using light microscopy. Compared to the other treatments, oregano oil caused the least damage to stainless steel (~0.001% weight loss), whereas sodium hypochlorite caused the most severe damage (0.00817% weight loss) when applied at 0.5 mg mL-1. Moreover, oregano oil also had an apparent protective impact on the stainless steel as weight losses were less than for the control surfaces (distilled water only). On the other hand, sodium hypochlorite caused the most severe damage to stainless steel (0.00817% weight loss). In conclusion, oregano oil eliminated monoculture biofilms of two important foodborne pathogens on 304 stainless-steel surfaces, while at the same time minimizing damage to the surfaces compared with conventional disinfectant treatments.

Evaluation of extracellular polymeric substances matrix volume, surface roughness and bacterial adhesion property of oral biofilm.

Background/purpose: Oral biofilms are highly structured bacterial colonies embedded in a highly hydrated extracellular polymeric substances (EPS) matrix. This study aimed to investigate the characteristics of oral biofilm at different stages of maturation. Materials and methods: Oral multispecies biofilms were grown anaerobically from plaque bacteria on collagen coated hydroxyapatite discs in brain heart infusion broth for one and three weeks. The volume of live bacteria and EPS matrix of the biofilms were determined by using corresponding fluorescent probes and confocal laser scanning microscopy. Atomic force microscopy (AFM) was used to quantitatively probe and correlate cell surface adhesion force of biofilms. The surface roughness was quantified in terms of the root mean square average of the height deviations. Adhesion was measured from force-distance data for the retraction of the cell from the surface. Results: The volume of live bacteria and EPS of 3-week-old biofilms was higher than 1-week-old biofilms. The surface roughness value in 1-week-old biofilms was significantly higher than that in 3-week-old biofilms. AFM force-distance curve results showed that the adhesion force at the cell-cell interface was significantly more at-tractive than those at bacterial cells surface of both stages biofilms. Adhesion forces between the AFM tip and the surface of bacterial cell were fairly constant, whereas the cell-cell interface experienced greater adhesion forces in the biofilm's development. Conclusion: As oral biofilms become mature, EPS volume and cell-cell adhesion forces increase while the surface roughness decreases.

Bacterial adhesion to composite resins produced by additive and subtractive manufacturing.

The aim of this study was to evaluate the surface roughness and contact angle of composite resins produced by CAD/CAM milling and three-dimensional (3D) printing for permanent restorations as well as the adhesion of S. mutans and S. sanguinis bacteria to these composites. Three CAD/CAM milling composite resins (Vita Enamic-VE, Cerasmart-CE, Lava Ultimate-LU) and three 3D printing resins (Varseo Smile Crown plus-VSC, Saremco print Crowntech-SPC, Formlabs 3B Permanent crown-FLP) were selected. Twenty samples were prepared for each group. Using a contact profilometer, the surface roughness was determined, and an optical goniometer was used to quantify the contact angle. To evaluate the bacterial adhesion, composite specimens were immersed in mucin containing artificial saliva. All samples were incubated for 24 h at 37°C in 5% CO2. CFUs were determined by counting colonies after the incubation period. Surface roughness values of test samples were the highest in the Group VSC [0.46 (0.14) µm], whereas the lowest values were found in the Group LU [0.23 (0.05) µm]. There was no statistically significant difference between the groups in contact angle values (p > 0.05). The S. mutans adhesion extent on the Group SPC was statistically higher compared to all other materials with p < 0.05. For S. sanguinis, the lowest bacterial adhesion value was recorded in Group CE (3.00 × 104 CFU/ml) and statistically significant differences were found with Group VE and VSC (p < 0.05). Different digital manufacturing techniques and material compositions can affect the surface roughnesses of composite resins. All composite resin samples have hydrophobic characteristics. Microbial adhesion of the tested composite resins may be varied depending on the bacterial species. S. mutans showed much more adhesion to these materials than S. sanguinis.

Superhydrophilic Poly(2-hydroxyethyl methacrylate) Hydrogel with Nanosilica Covalent Coating: A Promising Contact Lens Material for Resisting Tear Protein Deposition and Bacterial Adhesion.

Tear protein deposition and bacterial adhesion are the main drawbacks of the hydrogel contact lens. In this study, we developed a novel superhydrophilic poly(2-hydroxyethyl methacrylate) (NSCC-pHEMA) hydrogel with nanosilica covalent coating by the combination of colloidal silica immersion and dehydration treatment. The infrared spectroscopy and energy dispersive X-ray spectroscopy analyses confirmed the successful formation of Si-O covalent bonding between nanosilica and pHEMA hydrogel. This coating was highly stable against powerful sonication or long-term shaking immersion treatment. Among various NSCC-pHEMA hydrogels with different colloidal silica concentrations, the 7%NSCC-pHEMA hydrogel generated a superhydrophilic micro wrinkle surface with a root-mean-square roughness of 43.10 nm, which dramatically reduced the deposition of lysozyme and bovine serum albumin by 65% and 57%, respectively, and decreased the adhesion of S. aureus and E. coli by 59% and 66%, respectively, in comparison to the pHEMA hydrogel. However, the nanosilica coating had little effect on the mechanical properties, light transmittance, oxygen permeability, and equilibrium water content of the pHEMA hydrogel. NSCC-pHEMA hydrogels were nontoxic to both mouse fibroblasts (L929) and human immortalized keratinocytes (HaCaT). Thus, the superhydrophilic NSCC-pHEMA hydrogel is a potential contact lens material for resisting tear protein deposition and bacterial adhesion.